News
Crane working safety rules
2014-11-26 14:37
Crane working safety rules
Crane should be someone driving, drivers should be trained, familiar with the structural characteristics and method of operation of the machine, and issued a certificate after passing the examination, will be allowed to drive.
1, there should be someone to drive gantry crane, the driver should be trained, familiar with the structural characteristics and method of operation of the machine, and issued a certificate after passing the examination, will be allowed to drive.
2, only driver to drive.
3, when the drivers work, just listen to the command of specialized personnel on the ground (and only one person directing), but no matter who issued a stop signal shall stop and identify the situation and then drive.
4, the day before each drive, you must check all mechanical and electrical equipment is good, the operating system is flexible, in accordance with regulations for equipment maintenance and lubrication.
5, first class lifting items so close to the rated load of the items being lifted, the driver should first heavy lifting to not more than 0.5m height, and then fell to the ground near the brake.
6, prohibit overload.
7, prohibits tilt lifting items.
8, when the gantry crane lifting goods, people should avoid or bypass-ringing, people banned from the head through the car must issue a warning signal before driving.
9, along with items prohibited person lift.
10, are not allowed to stay in the air for a long time hoists, gantry crane when lifting heavy objects, drivers and ground commanders not to leave.
11, when the drivers shifting, the two classes of common drivers should check the mechanical equipment and electrical equipment in the whole machine and fill driver journal.
12, the examination should cut off the power, and the hang "Someone overhaul" sign, so as to avoid causing major car accident.
13, after the work is completed gantry crane, open to the designated location, all the handles are to zero, turn off the power.
14, when the power failure in sudden, to switch off the main circuit, all the control handle to the zero position.
15, prohibits more than six wind work.
Crane should be someone driving, drivers should be trained, familiar with the structural characteristics and method of operation of the machine, and issued a certificate after passing the examination, will be allowed to drive.
1, there should be someone to drive gantry crane, the driver should be trained, familiar with the structural characteristics and method of operation of the machine, and issued a certificate after passing the examination, will be allowed to drive.
2, only driver to drive.
3, when the drivers work, just listen to the command of specialized personnel on the ground (and only one person directing), but no matter who issued a stop signal shall stop and identify the situation and then drive.
4, the day before each drive, you must check all mechanical and electrical equipment is good, the operating system is flexible, in accordance with regulations for equipment maintenance and lubrication.
5, first class lifting items so close to the rated load of the items being lifted, the driver should first heavy lifting to not more than 0.5m height, and then fell to the ground near the brake.
6, prohibit overload.
7, prohibits tilt lifting items.
8, when the gantry crane lifting goods, people should avoid or bypass-ringing, people banned from the head through the car must issue a warning signal before driving.
9, along with items prohibited person lift.
10, are not allowed to stay in the air for a long time hoists, gantry crane when lifting heavy objects, drivers and ground commanders not to leave.
11, when the drivers shifting, the two classes of common drivers should check the mechanical equipment and electrical equipment in the whole machine and fill driver journal.
12, the examination should cut off the power, and the hang "Someone overhaul" sign, so as to avoid causing major car accident.
13, after the work is completed gantry crane, open to the designated location, all the handles are to zero, turn off the power.
14, when the power failure in sudden, to switch off the main circuit, all the control handle to the zero position.
15, prohibits more than six wind work.
