Erecting machine needs to be checked after installation project
 
 
Central Construction Machinery as a world famous bridge machine manufacturers specializing in the production, from the production to the factory, to the site installation and commissioning, there is a strict regulations, especially in the bridge machine installed, want to bridge machine check individual components, do not underestimate this aspect, there is a small screw may cause a malfunction occurs, check what specific projects, by the installer, zhengzhouHuazhong construction Machinery for you about:
 
1 first check ministries fastening bolt even any one bolt cannot be ignored.
2 the pin end of the cotter pin should be open.
3 the hydraulic system meets the requirements of the oil level.
4 each gear lubricant meets the requirements.
5 the hydraulic system piping is loose and leak.
6 lifting beam rope winch rope meets the requirements and if there is damage.
7 the electrical system is reliable, secure, error-free operation, the motor brake part is reliable, normal.
8 limit switches, bells is normal, vehicle equipment, tools are complete.
 
Conducting comprehensive lubrication and debugging for the bridge machine after all items were checked, and there was no problem find out.