News
Crossing the bridge over the transport and assembly machines
2015-01-23 13:45
Crossing the bridge over the transport and assembly machines
Erecting machine due to its structural characteristics and special requirements of the road to walk on, and must be transported in a disassembled state, if necessary.
1, the transport requirements
parts sequentially numbered by class packing, afraid to touch, wearing parts individually packaged, and in the box filled spacers; mounting surface for machined parts to do preservation, and then packaged.
removed parts should be numbered piece by piece, registration to prevent confusion.
not packaged parts with paint fill in the name, number, and other markers on the surface of the installation site.
surface should be oiled rope orderly wound on the reel.
hydraulic hose packing should be smooth, not piled up, there should be no dead corner, hard discount, oil.
box should be firm, packing parts should not do big pressure is small, lightweight not pressure.
When lifting machinery lifting strict adherence to safety rules. ,
2, the assembly site
To open the assembly site, a length of about 70m, a width of about 30m.
site compaction, fill the same standards should be shipped beam line.
venues irregularities within 60m range of not more than 150mm.
site without water, drainage measures.
crane work area without the high-voltage power lines and other pass.
installation technicians must be familiar with the installation of the machine structure, technical characteristics, hydraulic parts, electrical parts must have trained technicians conduct.
conduct an inventory before the assembly.
do the preparatory work required for installation tools and equipment.
hydraulic components assembled: You must do the cleaning work carried out under the guidance of the engineer in charge.
electrical components: Refer to the electrical schematics, carried out under the guidance of the engineer in charge.
major steel bolt installation, should be symmetrical position of the bolt from the inside out in accordance with regulations.
When lifting machinery lifting strict adherence to safety rules.
Erecting machine due to its structural characteristics and special requirements of the road to walk on, and must be transported in a disassembled state, if necessary.
1, the transport requirements
parts sequentially numbered by class packing, afraid to touch, wearing parts individually packaged, and in the box filled spacers; mounting surface for machined parts to do preservation, and then packaged.
removed parts should be numbered piece by piece, registration to prevent confusion.
not packaged parts with paint fill in the name, number, and other markers on the surface of the installation site.
surface should be oiled rope orderly wound on the reel.
hydraulic hose packing should be smooth, not piled up, there should be no dead corner, hard discount, oil.
box should be firm, packing parts should not do big pressure is small, lightweight not pressure.
When lifting machinery lifting strict adherence to safety rules. ,
2, the assembly site
To open the assembly site, a length of about 70m, a width of about 30m.
site compaction, fill the same standards should be shipped beam line.
venues irregularities within 60m range of not more than 150mm.
site without water, drainage measures.
crane work area without the high-voltage power lines and other pass.
installation technicians must be familiar with the installation of the machine structure, technical characteristics, hydraulic parts, electrical parts must have trained technicians conduct.
conduct an inventory before the assembly.
do the preparatory work required for installation tools and equipment.
hydraulic components assembled: You must do the cleaning work carried out under the guidance of the engineer in charge.
electrical components: Refer to the electrical schematics, carried out under the guidance of the engineer in charge.
major steel bolt installation, should be symmetrical position of the bolt from the inside out in accordance with regulations.
When lifting machinery lifting strict adherence to safety rules.
